LOCTITE 277 THREAD LOCKING GLUE CAN BE USED FOR LONG-TERM LOCKING, LOCAL HEATING CAN ONLY BE DISASSEMBLED TYPE: ULTRA-HIGH STRENGTH AND HIGH TEMPERATURE RESISTANT TYPE

Features:

●Super high strength: can be used for permanent locking, partial heating on the detachable side.

●Military standard certification: American military standard certification.

Typical use:

●Used for deformed locking threads under harsh chemicals, especially suitable for occasions where M36 threads are permanently locked.

●High strength, high viscosity, excellent chemical resistance, suitable for active metal surface.

●Used for M36 thread locking and sealing flange sealing, and replacement of gaskets. Prevent rust and corrosion of threads, and can be disassembled for heating.

technical parameter:

●Color: red

●Viscosity (mPa.s): 6000/8000

●Average removal torque (N.m): 32

●Average failure torque (N.m): 32

●Temperature range (℃):-54/150

●Curing speed (solid/solid) steel @ 25℃: 1 hour / 12 hours

●Recommended accelerator: 7649/7471

●Packing: 50ml bottle

instruct:

●Pretreatment: The surface of the installation parts needs to be cleaned to ensure that there is no oil and residual oil, such as: oil, anti-rust oil. Most of them do not require special pretreatment on the surface of the substrate, especially if it is difficult to bond the substrate, pretreatment is required.

●Sizing: Take an appropriate amount and evenly smear the surface of the thread.

●Removal: The spilled colloid will not solidify, you can wipe it off or use a special cleaning agent.

●Accelerator: If the accelerator is combined with LOC-7471 to use LOC-7649, it can effectively shorten the curing time.