Features:
High strength: for permanent locking, partial heating on the detachable side.
Typical use:
●Using ordinary locking metal thread, especially suitable for permanent locking below M20 thread.
●Used for active and inert metal substrates
●The high-strength Loctite 263 glue formula collects the various advantages of the product on the surface of inert metal, can be reliably cured, has high oil resistance and excellent high temperature performance, inert metal surface curing performance and oil resistance;
technical parameter:
●Color: red
●Viscosity: 400/600
●Curing rate (solid/solid) steel @ 25℃: 5 minutes / 24 hours
●Torque (N.m): 22
●Average removal torque (N.m): 33
●Temperature range (℃):-40/200
●Recommended accelerator: 7649/7471
●Packing: 50ml bottle
illustrate:
●Pretreatment: The surface of the installation parts needs to be cleaned to ensure that there is no oil and residual oil, such as: oil, anti-rust oil. Most of them do not require special pretreatment on the surface of the substrate, especially if it is difficult to bond the substrate, pretreatment is required.
●Sizing: Take an appropriate amount and evenly smear the surface of the thread.
●Removal: The spilled colloid will not solidify, you can wipe it off or use a special cleaning agent.
●Accelerator: If the accelerator is combined with LOC-7471 to use LOC-7649, it can effectively shorten the curing time.
Upload RFQ
Twitter
Linkedin
Facebook
YouTube
Sales@toplandoil.com
+86 21-50890868
Head Office: 8-1011,Lane 5600, Chuansha Road, Pudong, Shanghai, China